EuroCave recommends you
replace the carbon filter in your wine cellar cabinet annually as it an integral
part of the ventilation system and a condition of your warranty.
Instructions on Replacing the Carbon Filter on Vx83 & Sx59
models
1.
Remove the first and second
shelf from the top to access carbon filter
2.
Carbon filter
is located on the left hand side rear of cabinet wall, remove filter from upper
ventilation hole (may need a slight twist and pull)
3.
Push new filter
in place and follow instructions below for resetting the counter
log.
Instructions on Resetting the Carbon Filter
log
Once the
charcoal filter has been replaced, go to the charcoal filter counter log by
implementing the following:
Press the “--“
(minus button) until ECL mode appears on the
display.
Press
the set
button: the ”bL n” mode appears (or LU
for the version 114 to 116)
Press set
a second time and you’ll see the charcoal filter counter log
appear on the screen.
Reset the
counter by pressing the on/off
button. The flashing “keypad” icon of the charcoal filter will
disappear.
Finally, press and
release the SET button in order to display the temperature wait for
approximately 15 seconds, the temperature value will then appear on the screen
and all is back to normal.
Please replace
filter every 12 months (prompted by
flashing of “keypad” icon on display).
For further
queries and filter ordering, please contact our office on 1800 733 621 Monday to
Friday 9:00am – 5:00pm EST.